The radiator is arguably one of the most misunderstood automotive components. Primarily, it cools down the engine. Though they need heat to operate at an optimal level, too much heat will destroy the engine’s inner mechanics. Should the cylinders and pistons begin to overheat, it is the indefinite end of the ride. The heart of the car’s cooling system, the radiator ensures that the motor stays at the right temperature, allowing it to perform at maximum potential.
How to Tell When Cooling Systems Go Bad
It suffices to say that your radiator plays a crucial role in removing heat from your engine, thereby allowing it to function correctly, without risking a sudden breakdown. However, several telltale signs suggest you may have an issue with your cooling system that you should be mindful of. These include:
- When the Thermostat Becomes Clogged and Fails to Open
- Experiencing a Leak in the Cooling System
- Finding Pools of Fluid Under Your Parked Car
Dealing with any of the problems listed above can be severe, but recognizing them quickly can lead to a more straightforward solution. Millikan Battery and Electric Inc. is your source for comprehensive service when you need work on your car radiator in Winter Garden, FL.
Gain a better understanding of your car radiator in Winter Garden, FL. See why so many local drivers turn to our auto shop for comprehensive service.
Are you finding it challenging to rev up your boat? For marine engines, the boat starter in Winter Garden, FL, can be a finicky device. Today, we will discuss what you can do to determine whether your starter requires replacement. Please note that these instructions are for a 12V operating system.
First, let us rule out the other possibilities that can cause an engine to refuse to start. Be sure you are following the manufacturer’s directions for starting your boat. Also, ensure the main fuse is still in good shape and be sure all electrical connections are clean and connected correctly.
With these issues are taken care of, it is time to get your multimeter. Follow these steps:
- Turn the dial of the multimeter to DC voltage. Place the red probe and the black probe on their respective posts (red is for positive, black for negative). If the reading is below 11.3, replace or recharge the battery.
- With the multimeter still on the DC setting, place the red probe on the engine starter’s positive terminal and the black probe on the engine ground.
- Turn your ignition switch to “Start” and read the voltage. If the reading is more significant than 9.5 volts, try to start the engine. If this test fails, then your boat starter requires replacement or rebuilding. If the reading is less than 9.5 volts, you have a voltage loss between the battery and starter. Address this issue and then attempt the test again.
With the right equipment, you can determine whether your boat starter in Winter Garden, FL, requires service. Visit us for a replacement today.